Универзитет у Београду

Милош Д. Пјевић

др Милош Д. Пјевић, ванредни професор
Катедра за производно машинство
Кабинет: 257
Мејл адреса: mpjevic@mas.bg.ac.rs
Телефон: локал 438; директан 3302-438

Лична веб презентација

https://www.linkedin.com/in/milo%C5%A1-pjevi%C4%87-09b79084/

Термини за пријем студената

Понедељак, 13 - 14 часова, кабинет 246

Предмети

Адитивне производне технологије
Алати за обликовање лима
Алати и прибори
Завршни предмет - Алати и прибори
Завршни предмет - Технологија машинске обраде
Теорија резања
Технологија машинске обраде

Истраживачка област

Технологије резањем (микро, мезо, микро), Адитивне технологије, Технологије пластичног деформисања, МКЕ анализа, Алати и прибор, Обрада полимера, Обрада лима.

Образовање, стручна спрема

Универзитет у Београду, Машински факултет, инжењер машинства, 2011; Универзитет у Београду, Машински факултет, мастер инжењер машинства, 2013; Универзитет у Београду, Машински факултет, доктор наука - машинско инжењерство, 2019.

Публикације, признања, награде

Поповић М, Пјевић М, Алати за обликовање лима - Практикум за моделирање делова и алата у програму Creo Parametric, ISBN: 978-86-6060-065-5, Универзитет у Београду - Машински факултет, 2021.

Библиографија

Радови у часописима са SCI листе

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag (2021). Experimental investigation of the tool radius and micro-cutting speed influence on micro-cutting mechanisms for marble based material, Surface Topography-Metrology and Properties, 9(1).
IOP Publishing Ltd, Bristol, ISSN: 2051-672X, 10.1088/2051-672X/abedf7, M22.

Janković Milan, Balać Igor, Popović Mihajlo, Pjević Miloš, Miloš Marko (2024). Tensile strength and stiffness properties of additively manufactured PET-G polymer-based composite plates reinforced with different weight fractions of short carbon fibers, Journal of Mechanical Science and Technology, 38(6), 2971-2977.
Springer-Verlag GmbH Germany, part of Springer Nature, ISSN: 1738-494X, 10.1007/s12206-024-0517-y, M23.

Popović Mihajlo, Pjević Miloš, Milovanović Aleksa, Mladenović Goran, Milošević Miloš (2023). Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity, Journal of Mechanical Science and Technology, 37(2), 697-706.
Seoul, The Korean Society of Mechanical Engineers, ISSN: 1738-494X, 10.1007/s12206-023-0113-6, M23.

Vorkapić Nikola, Pjević Miloš, Popović Mihajlo, Slavković Nikola, Živanović Saša (2020). An additive manufacturing benchmark artifact and deviation measurement method, Journal of Mechanical Science and Technology, 34(7), 3015-3026.
Korean Soc Mechanical Engineers, Seoul, ISSN: 1738-494X, 10.1007/s12206-020-0633-2, M23.

Pjević Miloš, Tanović Ljubodrag, Mladenović Goran, Marković Biljana (2017). Experimental Examination of the Impact of Tool Radius on Specific Energy in Microcutting of Granite, Journal of Engineering Materials and Technology-Transactions of The Asme, 139(4).
ASME, New York, ISSN: 0094-4289, 10.1115/1.4036585, M23.

Радови у часописима ван SCI листе

Радови са конференција

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Stojadinović Slavenko (2020). The Development of CAD/CAM System for Automatic Manufacturing Technology Design for Part with Free Form Surfaces, Computational and Experimental Approaches in Materials Science and Engineering, Cnntech 2019, 90, 460-476.
Springer International Publishing Ag, Cham, ISSN: 2367-3370, 10.1007/978-3-030-30853-7_27, M14.

Stojadinović Slavenko, Pjević Miloš, Slavković Nikola, Puzović Radovan (2024). 3D SCANING AND INSPECTION GEOMETRICAL PARAMETERS OF SPROCKET TOOTH PROFILE, 7th International Scientific Conference - COMETa2024, Proceedings.
University of East Sarajevo, Faculty of Mechanical Engineering, ISBN: 978-99976-085-2-9, M33.

Pjević Miloš, Popović Mihajlo, Milovanović Aleksa, Puzović Radovan, Mladenović Goran (2024). THE POST-PROCESSING METHOD FOR LARGE-SIZED PARTS PRODUCED USING SLA/mSLA TECHNOLOGY, 7th International Scientific Conference - COMETa2024, Proceedings.
University of East Sarajevo, Faculty of Mechanical Engineering, ISBN: 978-99976-085-2-9, M33.

Popović Mihajlo, Furtula Marko, Pjević Miloš, Mladenović Goran (2023). SIMULATION, ANALYSIS AND OPTIMIZATION OF FORGING PROCESS FOR AXISYMMETRIC PART, Proceedings - 39th International Conference on production Engineering of Serbia – ICPES 2023.
UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF PRODUCTION ENGINEERING DEPARTMENT OF INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, ISBN: 978-86-6022-610-7, M33.

Varničić Ilija, Pjević Miloš, Popović Mihajlo (2023). State of the art in the field of cold forging tools, XI International Conference “Heavy Machinery-HM 2023”.
University of Kragujevac, Faculty of Mechanical and Civil Engineering, ISBN: 978-86-82434-01-6, M33.

Stefanović Ljiljana, Movrin Dejan, Milutinović Mladomir, Popović Mihajlo, Pjević Miloš (2023). Influence of injection molding process parameters on the mechanical properties of polypropylene and polyethylene parts, 39th International Conference on Production Engineering of Serbia.
Society of Production Engineering, ISBN: 978-86-6022-610-7, M33.

Pjević Miloš, Popović Mihajlo, Milutinović Mladomir, Movrin Dejan, Stefanović Ljiljana (2023). Impact of polymer types on applicability in rapid tooling, 39th International Conference on Production Engineering of Serbia.
Society of Production Engineering, ISBN: 978-86-6022-610-7, M33.

Pjević Miloš, Popović Mihajlo, Milutinović Mladomir, Movrin Dejan, Stefanović Ljiljana (2022). Experimental examination of the applicability of additive technologies in the field of rapid tooling - injection molding, Proceedings of 6th International Scientific Conference - COMETa2022.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-947-6-8, M33.

Pjević Miloš, Popović Mihajlo, Puzović Radovan (2022). Correlation between micro-cutting and static indentation, Proceedings of 6th International Scientific Conference - COMETa2022.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-947-6-8, M33.

Pjević Miloš, Tanović Ljubodrag (2021). State of the art of micro-cutting, Proceedings of XI All-Ukrainian scientific and technical conference Machining processes, machines and tools.
Zhytomyr Polytechnic State University, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Popović Mihajlo, Pjević Miloš (2021). Software upgrade for automatic rough milling technology design for parts with free form surfaces, XXXVIII Savetovanje proizvodnog mašinstva Srbije SPMS 2021 - zbornik radova.
Faculty of technical sciences Čačak, University of Kragujevac, ISBN: 978-86-7776-252-0, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Mladenović Goran (2020). Recycling system for the fdm/fff method material designed for small and medium-sized production batches, Proceedings of 5th International Scientific Conference - COMETa2020.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-719-8-1, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Milovanović Marko, Popović Mihajlo, Pjević Miloš, Simonović Vojislav (2020). Development of cam system for rough machining in free form surface manufacturing, Proceedings of 5th International Scientific Conference - COMETa2020.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-719-8-1, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag (2020). Correlation between static indentation and micro cutting marble-based material, Proceedings of XXI International Scientific and Technical Conference “Progressive Engineering, Technology and Engineering Education”.
Ministry of Education and Culture of Ukraine, M33.

Pjević Miloš, Stojadinović Slavenko, Tanović Ljubodrag, Popović Mihajlo, Mladenović Goran, Puzović Radovan (2019). Determination of the Optimal Regression Model for the Measurement Quality Characteristics of the Micro Cutting Stone-Based Materials, Proceedings of The 12th International Conference on Measurement and Quality Control - Cyber Physical.
Springer-Verlag Berlin, Berlin, ISSN: 2195-4356, 10.1007/978-3-030-18177-2_18, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag (2019). Determination of the mathematical model of the micro cutting force for the granite jošanica in the ductile mode, Proceedings of XX International Scientific and Technical Conference “Progressive Engineering, Technology and Engineering Education”.
Ministry of Education and Culture of Ukraine, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Puzović Radovan, Mladenović Goran (2018). Layers optimisation of the pla parts formed by additive technologies, Proceedings of 4th International Scientific Conference - COMETa2018.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-719-4-3, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš (2017). Software solution for automatic choise of cutting parameters in free form surfaces machining, Proceedings of XIV International Conference Maintenance and Production Engineering “KODIP - 2017”.
Engineering Academy of Montenegro, ISBN: 978-9940-527-51-8, M33.

Mladenović Goran, Tanović Ljubodrag, Pjević Miloš (2015). Machining error determination for 3-axis milling of free form surfaces, Proceedings of 8th International Working Conference “Total Quality Management - Advanced and Intelligent Approaches”.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-7083-858-1, M33.

Pjević Miloš, Tomović Aleksandar, Popović Mihajlo, Obradović Aleksandar (2024). Mass optimization of PLA cantilever beams, Proceedings of the 12th Annual Conference of Society for Structural Integrity and Life (DIVK12), November 17-19, 2024.
Društvo za Integritet i Vek Konstrukcija “Prof dr Stojan Sedmak” – Belgrade – Serbia, ISBN: 978-86-900686-2-3, M34.

Mladenović Goran, Stojanović Jagoš, Puzović Radovan, Popović Mihajlo, Pjević Miloš (2023). Aplication of rough machining with ball end mill cutter in 3 axis free form surface manufacturing, 7th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2023, The Book Of Abstracts, Zlatibor, July 04- July 07.
University of Belgrade – Faculty of Mechanical Engineering, ISBN: 978-86-6060-155-3, M34.

Stojanović Jagoš, Mladenović Goran, Tanasković Jovan, Pjević Miloš (2023). Force prediction models in ball end milling of freeform surfaces, 7th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2023, The Book Of Abstracts, Zlatibor, July 04- July 07.
University of Belgrade – Faculty of Mechanical Engineering, ISBN: 978-86-6060-155-3, M34.

Mladenović Goran, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Jevtić Ivana (2022). Strategies development for rough milling in free form surfaces machining, International Conference of Experimental and Numerical Investigations and New Technologies - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1, M34.

Pjević Miloš, Popović Mihajlo, Puzović Radovan, Mladenović Goran (2022). Part deformability prediction during the milling of AlMgSi1 (6082) material, International Conference of Experimental and Numerical Investigations and New Technologies - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1, M34.

Pjević Miloš, Popović Mihajlo, Mladenović Goran, Tanović Ljubodrag, Puzović Radovan (2021). Applicability of rapid tooling in injection molding application, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2021” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Jevtić Ivana (2021). Rough milling with end mill cutter in apllication for free form surfaces machining, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2021” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Pjević Miloš, Popović Mihajlo, Mladenović Goran, Milošević Miloš, Tanović Ljubodrag (2020). Influence of the part cooling during the printing process on the quality of polymer parts produced by fff/ffd method, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2020” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Popović Mihajlo, Pjević Miloš, Mladenović Goran, Milošević Miloš, Liviu Marsavina, Filippo Berto (2020). Variable layers thickness optimization of the pla parts formed by fff/ffd method, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2020” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo (2020). Concept development for rough milling of free form surfaces, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2020” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Stojadinović Slavenko (2019). Development of application software for automatic manufacturing techology design of free form surfaces, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2019” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9, M34.

Popović Mihajlo, Pjević Miloš, Mladenović Goran, Tanović Ljubodrag, Milošević Miloš, Milovanović Aleksa, Milošević Nenad (2019). Experimental determination of type of fracture pla specimens in the function of printing conditions, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2019” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9, M34.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Mladenović Goran (2018). Experimental examinations of machinability of ceramic materials during micro processing, 22nd European Conference of Fracture “ECF22” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-900686-0-9, M34.

Mladenović Goran, Đurković Marija, Milošević Miloš, Milovanović Marko, Pjević Miloš, Mitrović Nenad (2018). The influence of welded ribs on the stability of the X table construction, 22nd European Conference of Fracture “ECF22” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-900686-0-9, M34.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Tim Jones, Pjević Miloš (2018). Manufacturing and geometry measurement of parts with free form surfaces, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2018” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-7083-979-3, M34.

Živanović Saša, Tanović Ljubodrag, Puzović Radovan, Kokotović Branko, Slavković Nikola, Popović Mihajlo, Mladenović Goran, Stojadinović Slavenko, Pjević Miloš, Vorkapić Nikola, Dimić Zoran, Rakić Aleksandar, Manasijević Srećko (2022). Revitalizacija horizontalne bušilice glodalice LOLA HBG 80 upravljanjem otvorene arhitekture na LinuxCNC platformi, 43 JUPITER konferencija : zbornik radova, Beograd, oktobar 2022.
Univerzitet u Beogradu Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Vorkapić Nikola, Maletić Julija, Nešovanović Ljubomir, Živanović Saša, Pjević Miloš (2022). Eksperimentalna identifikacija specifičnih sila rezanja sa eksperimentima obimnog glodanja, 43 JUPITER konferencija : zbornik radova, Beograd, oktobar 2022.
Univerzitet u Beogradu Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Spasojević Bojana, Popović Mihajlo, Pjević Miloš, Mladenović Goran, Puzović Radovan (2022). Simulacija procesa kovanja primenom naprednih softverskih alata, 43. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-137-9, M63.

Trajkov Aleksandra, Popović Mihajlo, Pjević Miloš, Mladenović Goran (2022). Analiza proizvodnosti delova većih gabarita primenom aditivnih tehnologija i tehnologija spajanja, 43. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-137-9, M63.

Stojanović Jagoš, Pjević Miloš, Popović Mihajlo, Mladenović Goran (2022). State of the art in the field of force prediction in ball end milling, 43. JUPITER konferencija : zbornik radova.
Univerzitet u Beogradu - Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Jevtić Ivana, Popović Mihajlo, Mladenović Goran, Pjević Miloš, Milošević Miloš, Milovanović Aleksa (2022). Generativni dizajn i primena aditivnih tehnologija u okruženju creo parametric, 43. JUPITER konferencija - Zbornik radova.
Univerzitet u Beogradu - Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Tanović Ljubodrag, Živanović Saša, Puzović Radovan, Kokotović Branko, Popović Mihajlo, Slavković Nikola, Mladenović Goran, Stojadinović Slavenko, Pjević Miloš, Vorkapić Nikola (2020). Razvoj nove generacije domaćih obradnih sistema rezultati istraživanja za 2019. godinu, 42 JUPITER konferencija : zbornik radova, Beograd, oktobar 2020.
Univerzitet u Beogradu Mašinski Fakultet, ISBN: 978-86-6060-054-9, M63.

Kalabić Ranka, Popović Mihajlo, Pjević Miloš, Mladenović Goran, Tanović Ljubodrag (2020). Istraživanje uticaja parametara obrade na pokazatelje kvaliteta pri obradi rezanjem polimera, 42. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-055-6, M63.

Jovančićević Luka, Popović Mihajlo, Pjević Miloš, Tanović Ljubodrag (2020). Eksperimentalna identifikacija ugla elastičnog vraćanja kod šireg spektra materijala, 42. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-055-6, M63.

Mladenović Goran, Tanović Ljubodrag, Milovanović Marko, Popović Mihajlo, Puzović Radovan, Pjević Miloš (2020). Development of a system for automatic technology design for pre-machining of parts with free form surfaces, Zbornik radova 42. JUPITER konferencije, 29. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-055-6, M63.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo (2018). The development of software solution for automatic choise of machining parameters for free form surfaces parts, Zbornik radova 41. JUPITER konferencije, 28. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-978-6, M63.

Pjević Miloš, Tanović Ljubodrag (2017). Experimental identification of material removal mechanisms during micro cutting stone based materials, Proceedings of XIV International Conference Maintenance and Production Engineering “KODIP - 2017”.
Engineering Academy of Montenegro, ISBN: 978-9940-527-51-8, M63.

Pjević Miloš, Tanović Ljubodrag, Mladenović Goran (2016). Uticaj putanje alata na kritičnu dubinu prodiranja kod mikrorezanja krtih materijala, 40. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-7083-893-2, M63.

Mladenović Goran, Tanović Ljubodrag, Pjević Miloš, Popović Mihajlo (2016). Sculptured surface milling - the development of CAD/CAM system, Zbornik radova sa 40. JUPITER konferencije, 27. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-893-2, M63.

Pjević Miloš, Tanović Ljubodrag (2015). Pregled stanja istrazivanja u domenu mikro-rezanja krtih materuala, Konferencija Održavanje i Proizvodni Inženjering “KODIP 2015” - Zbornik Radova.
Inženjerska Akademija Crne Gore, ISBN: 978-9940-669-01-0, M63.

Pjević Miloš, Mladenović Goran, Puzović Radovan, Tanović Ljubodrag (2014). Primena cad/cam sistema u projektovanju i izradi profilnih kruznih strugarskih nozeva, 41. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-7083-838-3, M63.

Jotić Milica, Popović Mihajlo, Pjević Miloš, Bojović Božica (2024). PRIKAZ ADITIVNE TEHNOLOGIJE EKSTRUDIRANJEM MATERIJALA ZA IZRADU DELOVA OD KOMPOZITA, 44. JUPITER KONFERENCIJA - ZBORNIK RADOVA.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-204-8.

Krezović Nemanja, Bojović Božica, Pjević Miloš, Popović Mihajlo (2024). PROJEKTOVANJE I IZRADA OKVIRA BESPILOTNE LETELICE PRIMENOM GENERATIVNOG DIZAJNA I ADITIVNIH TEHNOLOGIJA, 44. JUPITER KONFERENCIJA - ZBORNIK RADOVA.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-204-8.

Lazarević Natalija, Anđelić Kristina, Lazić Aleksandar, Popović Mihajlo, Pjević Miloš, Milovanović Aleksa (2024). UTICAJ PROMENE PARAMETARA NA MEHANIČKA SVOJSTVA PROIZVODA DOBIJENIH ADITIVNIM TEHNOLOGIJAMA, 44. JUPITER KONFERENCIJA - ZBORNIK RADOVA.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-204-8.

Pejčić Danilo, Mišković Žarko, Popović Mihajlo, Pjević Miloš, Mitrović Radivoje, Magdolen Lubos, Danko Jan (2024). PROCENA RIZIKA ADITIVNIH PROIZVODNIH TEHNOLOGIJA PRIMENOM KINIJEVE METODE, 44. JUPITER KONFERENCIJA - ZBORNIK RADOVA.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-204-8.

Pjević Miloš, Tanović Ljubodrag, Ćosović Vladan (2016). Eksperimentalna identifikacija uticaja geometrije alata na bočno razaranje materijala kod mikro rezanja mermera, Proceedings of 3rd International Scientific Conference - COMETa2016.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-623-7-8.

Mladenović Goran, Tanović Ljubodrag, Pjević Miloš (2014). Obrada složenih površina glodanjem – poređenje strategija obrade, 39. JUPITER konferencija, 26. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-838-3.