Универзитет у Београду

Grbović Aleksandar, Kastratović Gordana, Sedmak Aleksandar, Balać Igor, Popović Mihajlo (2019). Fatigue crack paths in light aircraft wing spars, International Journal of Fatigue, 123, 96-104.
Elsevier Sci Ltd, Oxford, ISSN: 0142-1123, 10.1016/j.ijfatigue.2019.02.013, M21.

Popović Mihajlo, Pjević Miloš, Milovanović Aleksa, Mladenović Goran, Milošević Miloš (2023). Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity, Journal of Mechanical Science and Technology, 37(2), 697-706.
Springer Nature Switzerland, ISSN: 1976-3824, 10.1007/s12206-023-0113-6, M23.

Živanović Saša, Popović Mihajlo, Vorkapić Nikola, Pjević Miloš, Slavković Nikola (2020). Pregled tehnologija brze izrade prototipova pomoću subtraktivnih, aditivnih i formativnih procesa, FME Transactions, 48(1), 246-253.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet2001246Z, M24.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Mladenović Goran (2020). Recycling system for the FDM/FFF method material designed for small and medium-sized production batches, Advanced Technologies and Materials, 45(2), 17-20.
ISSN: 2620-0325, 10.24867/ATM-2020-2-003, M24.

Popović Mihajlo, Tanović Ljubodrag, Ehmann Kornel F. (2017). Predikcija sila rezanja - eksperimentalna identifikacija parametara ortogonalnog rezanja, FME Transactions, 45(4), 459-467.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1704459P, M24.

Jovičić Milenko M., Tanović Ljubodrag, Popović Mihajlo (2020). Podsećanje na život i rad dr Vladimira Šolaje, redovnog profesora Mašinskog fakulteta Univerziteta u Beogradu - povodom 100 godina od njegovog rođenja (1920-2020.), Tehnika, 75(6), 719-724.
Savez inženjera i tehničara Srbije, Beograd, ISSN: 0040-2176, 10.5937/tehnika2006719J, M51.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Mladenović Goran (2020). Recycling system for the FDM/FFF method material designed for small and medium-sized production batches, Advanced Technologies and Materials, 45(2), 17-20.
ISSN: 2620-0325, 10.24867/ATM-2020-2-003, M51.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Stojadinović Slavenko (2020). The Development of CAD/CAM System for Automatic Manufacturing Technology Design for Part with Free Form Surfaces, Computational and Experimental Approaches in Materials Science and Engineering, Cnntech 2019, 90, 460-476.
Springer International Publishing Ag, Cham, ISSN: 2367-3370, 10.1007/978-3-030-30853-7_27, M14.

Tanović Ljubodrag, Popović Mihajlo, Mladenović Goran (2012). Исследования в области микрорезания мрамора и гранита, Theses of lectures XІII Іnternational Scientific and Technical Conference, The Progressive Engineering & Technique.
Механіко-машинобудівний інститут НТУУ “КПІ”, M32.

Pjević Miloš, Popović Mihajlo, Milovanović Aleksa, Puzović Radovan, Mladenović Goran (2024). THE POST-PROCESSING METHOD FOR LARGE-SIZED PARTS PRODUCED USING SLA/mSLA TECHNOLOGY, 7th International Scientific Conference - COMETa2024, Proceedings.
University of East Sarajevo, Faculty of Mechanical Engineering, ISBN: 978-99976-085-2-9, M33.

Popović Mihajlo, Furtula Marko, Pjević Miloš, Mladenović Goran (2023). SIMULATION, ANALYSIS AND OPTIMIZATION OF FORGING PROCESS FOR AXISYMMETRIC PART, Proceedings - 39th International Conference on production Engineering of Serbia – ICPES 2023.
UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF PRODUCTION ENGINEERING DEPARTMENT OF INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, ISBN: 978-86-6022-610-7, M33.

Stefanović Ljiljana, Movrin Dejan, Milutinović Mladomir, Popović Mihajlo, Pjević Miloš (2023). Influence of injection molding process parameters on the mechanical properties of polypropylene and polyethylene parts, 39th International Conference on Production Engineering of Serbia.
University of Novi Sad, faculty of Technical Sciences, ISBN: 978-86-6022-610-7, M33.

Pjević Miloš, Popović Mihajlo, Puzović Radovan (2022). Correlation between micro-cutting and static indentation, Proceedings of 6th International Scientific Conference - COMETa2022.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-947-6-8, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Popović Mihajlo, Pjević Miloš (2021). Software upgrade for automatic rough milling technology design for parts with free form surfaces, XXXVIII Savetovanje proizvodnog mašinstva Srbije SPMS 2021 - zbornik radova.
Faculty of technical sciences Čačak, University of Kragujevac, ISBN: 978-86-7776-252-0, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag (2020). Correlation between static indentation and micro cutting marble-based material, Proceedings of XXI International Scientific and Technical Conference “Progressive Engineering, Technology and Engineering Education”.
Ministry of Education and Culture of Ukraine, M33.

Pjević Miloš, Stojadinović Slavenko, Tanović Ljubodrag, Popović Mihajlo, Mladenović Goran, Puzović Radovan (2019). Determination of the Optimal Regression Model for the Measurement Quality Characteristics of the Micro Cutting Stone-Based Materials, Proceedings of The 12th International Conference on Measurement and Quality Control - Cyber Physical.
Springer-Verlag Berlin, Berlin, ISSN: 2195-4356, 10.1007/978-3-030-18177-2_18, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag (2019). Determination of the mathematical model of the micro cutting force for the granite jošanica in the ductile mode, Proceedings of XX International Scientific and Technical Conference “Progressive Engineering, Technology and Engineering Education”.
Ministry of Education and Culture of Ukraine, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Puzović Radovan, Mladenović Goran (2018). Layers optimisation of the pla parts formed by additive technologies, Proceedings of 4th International Scientific Conference - COMETa2018.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-719-4-3, M33.

Popović Mihajlo, Tanović Ljubodrag, Mladenović Goran (2013). Geometry analysis of straight fluted taps, Proceedings, 35th International Conference on Production Engineering ICPE 2013.
Kraljevo : Faculty of Mechanical and Civil Engineering in Kraljevo, ISBN: 978-86-82631-69-9, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Popović Mihajlo (2013). Analysis Of Machining Strategies Using Commercial CAD/CAM Software, Proceedings, 35th International Conference on Production Engineering ICPE 2013.
Kraljevo : Faculty of Mechanical and Civil Engineering in Kraljevo, ISBN: 978-86-82631-69-9, M33.

Tanović Ljubodrag, Bojanić Pavao, Popović Mihajlo, Mladenović Goran (2012). Mehanički mikroobradni procesi, Proceedings - X International Conference Maintenance and Production Engineering ,,KODIP - 2012''.
Cooperative training center faculty of Mechanical engineering Podgorica, ISBN: 978-9940-527-24-2, M33.

Pjević Miloš, Tomović Aleksandar, Popović Mihajlo, Obradović Aleksandar (2024). Mass optimization of PLA cantilever beams, Proceedings of the 12th Annual Conference of Society for Structural Integrity and Life (DIVK12), November 17-19, 2024.
Društvo za Integritet i Vek Konstrukcija “Prof dr Stojan Sedmak” – Belgrade – Serbia, ISBN: 978-86-900686-2-3, M34.

Mladenović Goran, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Jevtić Ivana (2022). Strategies development for rough milling in free form surfaces machining, International Conference of Experimental and Numerical Investigations and New Technologies - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1, M34.

Pjević Miloš, Popović Mihajlo, Mladenović Goran, Tanović Ljubodrag, Puzović Radovan (2021). Applicability of rapid tooling in injection molding application, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2021” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Jevtić Ivana (2021). Rough milling with end mill cutter in apllication for free form surfaces machining, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2021” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Popović Mihajlo, Pjević Miloš, Mladenović Goran, Milošević Miloš, Liviu Marsavina, Filippo Berto (2020). Variable layers thickness optimization of the pla parts formed by fff/ffd method, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2020” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo (2020). Concept development for rough milling of free form surfaces, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2020” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Popović Mihajlo, Pjević Miloš, Mladenović Goran, Tanović Ljubodrag, Milošević Miloš, Milovanović Aleksa, Milošević Nenad (2019). Experimental determination of type of fracture pla specimens in the function of printing conditions, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2019” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9, M34.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Mladenović Goran (2018). Experimental examinations of machinability of ceramic materials during micro processing, 22nd European Conference of Fracture “ECF22” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-900686-0-9, M34.

Maletić Julija, Živanović Saša, Popović Mihajlo, Puzović Radovan (2024). THE SIMULATION OF MACHINING FREE-FORM SURFACES ON A MILLING MACHINE WITH A HORIZONTAL ROTARY AXIS, 44. JUPITER konferencija, 40. simpozijum NU-Roboti-FTS, Zbornik radova, 16-17. oktobar 2024..
UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET, ISBN: 978-86-6060-204-8, M63.

Nešovanović Ljubomir, Živanović Saša, Popović Mihajlo (2024). Simulation of a three-axis mechanism with parallel kinematics based on Chebyshev’s linkage, 44. JUPITER konferencija, 40. simpozijum NU-Roboti-FTS, Zbornik radova, 16-17. oktobar 2024..
UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET, ISBN: 978-86-6060-204-8, M63.

Jovanović Radiša, Bugarić Uglješa, Vesović Mitra, Perišić Natalija (2022). ФАЗИ И НЕЛИНЕАРНО УПРАВЉАЊЕ ЗАХВАТНОГ МЕХАНИЗМА И МОТОРА ЈЕДНОСМЕРНЕ СТРУЈЕ - ПРЕГЛЕД РЕЗУЛТАТА ИСТРАЖИВАЊА У ОКВИРУ ПРОЈЕКТА MISSION4.0, 43. JUPITER KONFERENCIJA sa međunarodnim učešćem ZBORNIK RADOVA/ 43rd JUPITER CONFERENCE with foreign participants PROCEEDINGS / 39. simpozijum: NU - ROBOTI - FTS.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-137-9, M63.

Milutinović Milan, Živanović Saša, Vasilić Goran, Kokotović Branko, Slavković Nikola, Dimić Zoran (2022). 3+2 axis machining strategy on the new grinding machine for manufacturing profile milling cutters, 43. JUPITER konferencija, 39. simpozijum NU-Roboti-FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 978-86-6060-137-9, M63.

Erwinski Krystian, Karasek Gabriel, Živanović Saša, Dimić Zoran, Slavković Nikola (2022). Real-time control of a KEOPS-DELTA parallel kinematics machine using LinuxCNC and ETHERCAT, 43rd JUPITER conference, 39th symposium NC-Robots-FTS, Proceedings.
University of Belgrade, Faculty of Mechanical Engineering, ISBN: 978-86-6060-137-9, M63.

Spasojević Bojana, Popović Mihajlo, Pjević Miloš, Mladenović Goran, Puzović Radovan (2022). Simulacija procesa kovanja primenom naprednih softverskih alata, 43. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-137-9, M63.

Stojanović Jagoš, Pjević Miloš, Popović Mihajlo, Mladenović Goran (2022). State of the art in the field of force prediction in ball end milling, 43. JUPITER konferencija : zbornik radova.
Univerzitet u Beogradu - Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Jevtić Ivana, Popović Mihajlo, Mladenović Goran, Pjević Miloš, Milošević Miloš, Milovanović Aleksa (2022). Generativni dizajn i primena aditivnih tehnologija u okruženju creo parametric, 43. JUPITER konferencija - Zbornik radova.
Univerzitet u Beogradu - Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Kalabić Ranka, Popović Mihajlo, Pjević Miloš, Mladenović Goran, Tanović Ljubodrag (2020). Istraživanje uticaja parametara obrade na pokazatelje kvaliteta pri obradi rezanjem polimera, 42. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-055-6, M63.

Jovančićević Luka, Popović Mihajlo, Pjević Miloš, Tanović Ljubodrag (2020). Eksperimentalna identifikacija ugla elastičnog vraćanja kod šireg spektra materijala, 42. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-055-6, M63.

Mladenović Goran, Tanović Ljubodrag, Milovanović Marko, Popović Mihajlo, Puzović Radovan, Pjević Miloš (2020). Development of a system for automatic technology design for pre-machining of parts with free form surfaces, Zbornik radova 42. JUPITER konferencije, 29. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-055-6, M63.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo (2018). The development of software solution for automatic choise of machining parameters for free form surfaces parts, Zbornik radova 41. JUPITER konferencije, 28. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-978-6, M63.

Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Popović Mihajlo, Mladenović Goran (2011). The application of the CAD/CAM/CAE program package in the design and manufacturing of casting pressure tools for parts made from polymers, Zbornik radova, 37. JUPITER konferencija, 24. simpozijum CAD/CAM.
Beograd : Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-724-9, M63.

Tanović Ljubodrag, Bojanić Pavao, Milutinović Dragan, Glavonjić Miloš, Puzović Radovan, Kokotović Branko, Živanović Saša, Popović Mihajlo, Slavković Nikola, Mladenović Goran (2009). Развој технологија вишеосне обраде сложених алата за потребе домаће индустрије – Рекапитулација резултата на пројекту МА14034, Зборник радова - 35. ЈУПИТЕР конферененција, 31. симпозијум НУ-Роботи-ФТС.
Универзитет у Београду, Машински факултет, Катедра за производно машинство, ISBN: ISBN 978-86-7083-666-2, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša, Dimić Zoran (2007). Configuration of a hybrid 5-axis machine, 33. JUPITER konferenencija, 29. simpozijum NU-Roboti-FTS.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 978-86-7083-592-4, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša (2006). Three axis parallel mechanism with specific solutions of passive translatory joint, 32. JUPITER konferencija, 28. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-557-6, M63.

Simonović Aleksandar, Živanović Saša (2005). CAD/CAM of mold for helicopter rotor composite blade, 31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-508-8, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša (2005). CAD interpretations of three axes parallel kinematics machine pn101, 27. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-508-8, M63.

Milutinović Dragan, Glavonjić Miloš, Kvrgić Vladimir, Živanović Saša (2005). Novi paralelni mehanizam za glodalice sa dugačkom X osom, 31. JUPITER konferencija, 27. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-508-8, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša, Kvrgić Vladimir, Višnjić Zoran (2004). One 3 – DOF Parallel Kinematic Machine, 30. JUPITER konferencija, 26. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-488-X, M63.

Živanović Saša (2004). Variability of parallel kinematic machines with linear actuators configuring, 30. JUPITER konferencija, Plenarna sednica, 26. simpozijum NU - Roboti - FTS, Zbornik radova, Plenarna sesija.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-488-X, M63.

Krezović Nemanja, Bojović Božica, Pjević Miloš, Popović Mihajlo (2024). PROJEKTOVANJE I IZRADA OKVIRA BESPILOTNE LETELICE PRIMENOM GENERATIVNOG DIZAJNA I ADITIVNIH TEHNOLOGIJA, 44. JUPITER KONFERENCIJA - ZBORNIK RADOVA.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-204-8.

Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Popović Mihajlo, Mladenović Goran (2011). Analysis of stone micro-cutting mechanism using the example of granite and marble grinding, 34th International Conference on Production Engineering, 28.30. September, Niš, Serbia.
Niš : Faculty of Mechanical Engineering, ISBN: 978-86-6055-019-6.

Mladenović Goran, Popović Mihajlo (2011). Design and optimization for truss constructions using the software package autodesk inventor 2011®, VII Triennial International Conference Heavy Machinery – HM 2011.
Kraljevo : Faculty of Mechanical and Civil Engineering, ISBN: 978-86-82631-58-3.

Tanović Ljubodrag, Bojanić Pavao, Popović Mihajlo, Mladenović Goran (2011). СПЕЦИФИKA МИКРОРЕЗАНИЯ ГРАНИТА, VII Международная научно-техническая конференция “Процеси Механiчної Обробки в Машинобудуванні 2011.
Житомирський державний технологічний університет, Житомир, ISSN: 1817–2997.

Kalajdžić Milisav, Tanović Ljubodrag, Babić Bojan, Glavonjić Miloš, Miljković Zoran, Puzović Radovan, Kokotović Branko, Popović Mihajlo, Živanović Saša, Tošić Dragan, Vasić Ivan (2021). CUTTING TECHNOLOGY: handbook, UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833).
Mašinski fakultet Univerziteta u Beogradu, ISBN: 978-86-6060-097-6.

Popović Mihajlo, Pjević Miloš (2021). Алати за обликовање лима - Практикум за моделирање делова и алата у програму Creo Parametric.
Универзитет у Београду - Машински факултет, ISBN: 978-86-6060-065-5.